Cisacad.net

Examenes Cisco CCNA v7.0 y IT Essentials v8 en Español
Menu
  • Inicio
  • CCNA v7.02
    • CCNA 1 v7.02
    • CCNA 2 v7.02
    • CCNA 3 v7.02
  • CCNA v6.0
    • CCNA 1 v6.0
    • CCNA 2 v6.0
    • CCNA 3 v6.0
    • CCNA 4 v6.0
  • CCNA v5.0
    • Exámenes Cisco CCNA 1 v.5.0
    • Exámenes Cisco CCNA 2 v.5.0
    • Exámenes Cisco CCNA 3 v.5.0
    • Exámenes Cisco CCNA 4 v.5.0
  • Security
    • Network Security v1.0
    • CCNA Security 2.0
  • It-essentials v7.01
  • Ciberseguridad
    • Introducción a la Ciberseguridad v2.1
    • Cybersecurity Essentials v1.1
  • Mas Cursos
    • Introduccion a IoT v2.0
    • GetConnected
    • Networking Essentials v2
    • Entrepreneurship

CCNA R&S Guía de Comandos De CCNA 1-4 Version 5

GUÍA DE COMANDOS DE CCNA R&S 1-4

VERSIÓN 5.

Por> Nicolás Contador V.

CCNA 1 v5.0

Comandos básicos

PASAR DEL EXEC USUARIO AL MODO EXEC PRIVILEGIADO

Switch> enable
Switch#

SUBIR AL MODO DE CONFIGURACIÓN GLOBAL

Switch# configure terminal

CONFIGURAR NOMBRE AL ROUTER O SWITCH

Switch(config)# hostname S1

DESHABILITAR LA RESOLUCIÓN DNS Y EVITAR PERDER TIEMPO EN ESTO

S1(config)# no ip domain-lookup

PROTEGER EL USUARIO PRIVILEGIADO CON UNA CONTRASEÑA CIFRADA

S1(config)# enable secret class

PROTEGER LA LÍNEA DE CONSOLA CON CONRASEÑA

S1(config)# line con 0

S1(config-line)# password cisco

S1(config-line)# login

S1(config-line)# exit

S1(config)#

CREAR UN AVISO DE ADVERTENCIA

S1(config)# banner motd #

Enter TEXT message. End with the character '#'.

Unauthorized access is strictly prohibited and prosecuted to the full extent of the law. #

GUARDAR LAS CONFGURACIONES A LA NVRAM

S1# copy running-config startup-config

MOSTRAR LA CONFIGURACIÓN ACTUAL, LA QUE ESTÁ EN LA RAM

S1# show running-config

VER LA VERSIÓN DEL IOS DEL ROUTER O SWITCH

S1# show version

MOSTRAR EL ESTADO DE LAS INTERFACES SU CONFIGURACIÓN DE IP

S1# show ip interface brief

MOSTRAR EL CONTENIDO DE LA MEMORIA FLASH

Switch# show flash:

BORRAR UN ARCHVO DE LA FLASH

Switch# delete vlan.dat

BORRAR EL ARCHIVO DE CONFIGURACIÓN INICIAL

Switch# erase startup-config

REINICIAR EL ROUTER O SWITCH

Switch# reload

CONFIGURAR UNA INTERFAZ VIRTUAL CONMUTADA (SVI) PARA LA ADMINISTRACIÓN DEL SWITCH

S1# config t

S1#(config)# interface vlan 1

S1(config-if)# ip address 192.168.1.2 255.255.255.0

S1(config-if)# no shut

PROTEGER LAS LÍNEAS DE TERMINAL VIRTUAL PARA ACCESOS TELNET O SSH

S1(config)# line vty 0 4

S1(config-line)# password cisco

S1(config-line)# login

S1(config-line)# end

CONFIGURAR UNA INTERFAZ CON DIRECCIÓN IPV4

R1(config)# interface g0/0

R1(config-if)# ip address 192.168.0.1 255.255.255.0

R1(config-if)# no shutdown

R1(config-if)# interface g0/1

R1(config-if)# ip address 192.168.2.1 255.255.255.0

R1(config-if)# no shutdown

CONFIGURAR UNA INTERFAZ CON DIRECCIÓN IPV6

R1(config)# interface g0/0

R1(config-if)# ipv6 address 2001:db8:acad:a::1/64

R1(config-if)# no shutdown

R1(config-if)# interface g0/1

R1(config-if)# ipv6 address 2001:db8:acad:1::1/64

R1(config-if)# no shutdown

VERIFICAR ESTADO Y CONFIGURACION IPV6 DE LAS INTERFACES

R1# show ipv6 interface brief

CONFIGURAR DIRECCIÓN DE ENLACE LOCAL (LINK LOCAL)

R1(config)# interface g0/0

R1(config-if)# ipv6 address fe80::1 link-local

R1(config-if)# interface g0/1

R1(config-if)# ipv6 address fe80::1 link-local

R1(config-if)# end

HABILITAR ENRUTAMIENTO IPV6

R1 # configure terminal

R1(config)# ipv6 unicast-routing

R1(config)# exit

CONFIGURACIÓN DE SSH

Router(config)# hostname R1

R1(config)# ip domain-name ccna-lab.com

R1(config)# crypto key generate rsa modulus 1024

R1(config)# username admin privilege 15 secret adminpass

R1(config)# line vty 0 4

R1(config-line)# transport input telnet ssh

R1(config-line)# login local

R1(config-line)# end

ACCEDER A TRAVÉS DE SSH

S1# ssh -l admin 192.168.1.1

CIFRAR LAS CONTRASEÑAS QUE ESTÁN EN TEXTO CLARO

R1(config)# service password-encryption

OBLIGAR A QUE LAS CONTRASEÑAS SEAN DE UN LARGO DETERMINADO

R1(config)# security passwords min-length 10

CONFIGURAR EL CIERRE DE LA SESIÓN EN CONSOLA Y VTY, EN ESTE CASO LUEGO DE 5 MINUTOS

R1(config)# line console 0

R1(config-line)# exec-timeout 5 0

R1(config-line)# line vty 0 4

R1(config-line)# exec-timeout 5 0

R1(config-line)# exit

R1(config)#

BLOQUEAR POR CIERTA CANTIDAD DE SEGUNDOS SI SE EQUIVOCA DE CONTRASEÑA DENTRO DE CIERTO TIEMPO. EN ESTE CASO QUEDA BLOQUEADO POR 30 SEGUNDOS SI SE EQUIVOCA 2 VECES DENTRO DE 120 SEGUNDOS.

login block-for 30 attempts 2 within 120

COPIAR EL ARCHIVO DE EJECUCIÓN A UN SERVIDOR TFTP. RESPALDAR.

S1# copy running-config tftp

COPIAR ARCHIVO DESDE EL SERVIDOR TFTP AL SWITCH O ROUTER. RESTAURAR.

S1# copy tftp running-config

RESPALDAR EL ARCHIVO DE EJECUCIÓN A LA MEMORIA FLASH

R1# copy running-config flash:

VER CONTENIDO DE LA MEMORIA FLASH

R1# dir flash:

LEER UN ARCHIVO RESPALDADO EN LA FLASH

R1# more flash:R1-running-config-backup

RESTAURAR UN ARCHIVO GUARDADO EN LA FLASH Y CARGARLO A LA RAM.

Router# copy flash:R1-running-config-backup running-config

 

PARA RECUPERAR O RESTABLECER LA CONTRASEÑA DE ACTIVACIÓN EN EL ROUTER DE LA SERIE CISCO 1900, COMPLETE LOS SIGUIENTES PASOS:

  1. Establezca una conexión de terminal con el router usando PUTTY u otro emulador de terminal.
  2. Inicie en ROMMON retirando el flash y reiniciando o seleccionando Alt-b durante un reinicio.
  3. Escriba confreg 0x2142 en el prompt de rommon.
  4. Escriba reset en el próximo prompt de rommon.
  5. Escriba no en el diálogo de configuración inicial.
  6. Escriba enable en el indicador del router.
  7. Escriba copy startup-config running-config para cargar la configuración de inicio.
  8. Escriba show running-config.
  9. Grabe una contraseña de habilitación no encriptada. Restablecer una contraseña de habilitación encriptada.
  10. En el modo de configuración, escriba config-register 0x2102.
  11. En el modo de privilegio, escriba copy running-config startup-config para guardar la configuración.
  12. Use el comando show version para verificar la configuración del registro de configuración.

CCNA 2 v5.0

RIP V2

R1# config t

R1(config)# router rip

R1(config-router)# version 2

R1(config-router)# passive-interface g0/1

R1(config-router)# network 172.30.0.0

R1(config-router)# network 10.0.0.0

R1(config-router)# no auto-summary

R2(config-router)# default-information originate

 

RIP IPV6

R1(config)# ipv6 router rip Test1

R1(config)# interface g0/1

R1(config)# ipv6 rip Test1 enable

R1(config)# interface s0/0/0

R1(config)# ipv6 rip Test1 enable

R2(config-rtr)# ipv6 rip Test2 default-information originate

 

OSPF V2

R1(config)# router ospf 1

R1(config-router)# network 192.168.12.0 0.0.0.3 area 0

R1(config-router)# network 192.168.13.0 0.0.0.3 area 0

R1(config-router)# router-id 11.11.11.11

R1(config-router)# passive-interface g0/0

R2(config-router)# passive-interface default

R2(config-router)# no passive-interface s0/0/0

R1(config-router)# auto-cost reference-bandwidth 10000

R1(config)# interface s0/0/1

R1(config-if)# ip ospf cost 1565

 

OSPF V3

R1(config)# ipv6 router ospf 1

R1(config-rtr)# router-id 1.1.1.1

R1(config)# interface g0/0

R1(config-if)# ipv6 ospf 1 area 0

R1(config-if)# interface s0/0/0

R1(config-if)# ipv6 ospf 1 area 0

R1(config-rtr)# passive-interface g0/0

R2(config-rtr)# passive-interface default

R2(config-rtr)# no passive-interface s0/0/1

 

ACL IPV4 STANDARD

R3(config)# access-list 1 remark Allow R1 LANs Access

R3(config)# access-list 1 permit 192.168.10.0 0.0.0.255

R3(config)# access-list 1 permit 192.168.20.0 0.0.0.255

R3(config)# access-list 1 deny any

R3(config)# interface g0/1

R3(config-if)# ip access-group 1 out

R1(config)# ip access-list standard BRANCH-OFFICE-POLICY

R1(config-std-nacl)# permit host 192.168.30.3

R1(config-std-nacl)# permit 192.168.40.0 0.0.0.255

R1(config-std-nacl)# end

R1(config)# interface g0/1

R1(config-if)# ip access-group BRANCH-OFFICE-POLICY out

 

ACL APLICADA A LAS LÍNEAS VTY

R1(config)# ip access-list standard ADMIN-MGT

R1(config-std-nacl)# permit host 192.168.1.3

R1(config-std-nacl)# permit 192.168.1.4 0.0.0.3

R1(config-std-nacl)# deny any

R1(config-std-nacl)# exit

R1(config)# line vty 0 15

R1(config-line)# access-class ADMIN-MGT in

R1(config-line)# exit

 

ACL EXTENDIDA

R1(config)# access-list 100 remark Allow Web & SSH Access

R1(config)# access-list 100 permit tcp host 192.168.10.3 host 10.2.2.1 eq 22

R1(config)# access-list 100 permit tcp any any eq 80

R1(config)# interface s0/0/0

R1(config-if)# ip access-group 100 out

 

R3(config)# ip access-list extended WEB-POLICY

R3(config-ext-nacl)# permit tcp 192.168.30.0 0.0.0.255 host 10.1.1.1 eq 80

R3(config-ext-nacl)# permit tcp 192.168.30.0 0.0.0.255 209.165.200.224 0.0.0.31 eq 80

R3(config-ext-nacl)# interface S0/0/1

R3(config-if)# ip access-group WEB-POLICY out

 

ACL IPV6

R1(config)# ipv6 access-list RESTRICT-VTY

R1(config-ipv6-acl)# permit tcp 2001:db8:acad:a::/64 any eq 23

R1(config-ipv6-acl)# permit tcp any any eq 22

R1(config-ipv6-acl)# line vty 0 4

R1(config-line)# ipv6 access-class RESTRICT-VTY in

R1(config-line)# end

 

R1(config)# ipv6 access-list RESTRICTED-LAN

R1(config-ipv6-acl)# remark Block Telnet from outside

R1(config-ipv6-acl)# permit tcp 2001:db8:acad:b::/64 host 2001:db8:acad:a::a eq 23 sequence 15

R1(config-ipv6-acl)# permit tcp any host 2001:db8:acad:a::3 eq www

R1(config-ipv6-acl)# deny tcp any 2001:db8:acad:a::/64 eq telnet

R1(config-ipv6-acl)# permit ipv6 any any

R1(config-ipv6-acl)# int g0/1

R1(config-if)# ipv6 traffic-filter RESTRICTED-LAN out

R1(config-if)# end

 

DHCP IPV4

R2(config)# ip dhcp excluded-address 192.168.0.1 192.168.0.9

R2(config)# ip dhcp excluded-address 192.168.1.1 192.168.1.9

R2(config)# ip dhcp pool R1G1

R2(dhcp-config)# network 192.168.1.0 255.255.255.0

R2(dhcp-config)# default-router 192.168.1.1

R2(dhcp-config)# dns-server 209.165.200.225

R2(dhcp-config)# domain-name ccna-lab.com

R2(dhcp-config)# lease 2

R2(dhcp-config)# exit

R2(config)# ip dhcp pool R1G0

R2(dhcp-config)# network 192.168.0.0 255.255.255.0

R2(dhcp-config)# default-router 192.168.0.1

R2(dhcp-config)# dns-server 209.165.200.225

R2(dhcp-config)# domain-name ccna-lab.com

R2(dhcp-config)# lease 2

 

R1(config)# interface g0/0

R1(config-if)# ip helper-address 192.168.2.254

 

DHCPv6 STATELESS

S1(config)# interface vlan 1

S1(config-if)# ipv6 address autoconfig

R1(config)# ipv6 dhcp pool IPV6POOL-A

R1(config-dhcpv6)# domain-name ccna-statelessDHCPv6.com

R1(config-dhcpv6)# dns-server 2001:db8:acad:a::abcd

R1(config-dhcpv6)# exit

R1(config)# interface g0/1

R1(config-if)# ipv6 dhcp server IPV6POOL-A

R1(config-if)# ipv6 nd other-config-flag

R1(config-if)# end

 

DHCPv6 STATEFUL

R1(config)# ipv6 dhcp pool IPV6POOL-A

R1(config-dhcpv6)# address prefix 2001:db8:acad:a::/64

R1(config-dhcpv6)# no domain-name ccna-statelessDHCPv6.com

R1(config-dhcpv6)# domain-name ccna-StatefulDHCPv6.com

R1(config)# interface g0/1

R1(config-if)# shutdown

R1(config-if)# ipv6 nd managed-config-flag

R1(config-if)# no shutdown

R1(config-if)# end

 

NAT ESTÁTICO

Gateway(config)# ip nat inside source static 192.168.1.20 209.165.200.225

Gateway(config)# interface g0/1

Gateway(config-if)# ip nat inside

Gateway(config-if)# interface s0/0/1

Gateway(config-if)# ip nat outside


NAT DINÁMICO

Gateway(config)# access-list 1 permit 192.168.1.0 0.0.0.255

Gateway(config)# ip nat pool public_access 209.165.200.242 209.165.200.254 netmask 255.255.255.224

Gateway(config)# ip nat inside source list 1 pool public_access

 

NAT pool Overload

Gateway(config)# access-list 1 permit 192.168.1.0 0.0.0.255

Gateway(config)# ip nat pool public_access 209.165.200.225  209.165.200.230 netmask 255.255.255.248

Gateway(config)# ip nat inside source list 1 pool public_access overload

PAT

Gateway(config)# ip nat inside source list 1 interface serial 0/0/1 overload

 

CCNA 3 v5.0

 

CREAR VLAN

S1(config)# vlan 10

S1(config-vlan)# name User

S1(config-vlan)# vlan 99

S1(config-vlan)# name Management

ASIGNAR PUERTOS A VLAN

S1(config)# interface f0/6

S1(config-if)# no shutdown

S1(config-if)# switchport mode access

S1(config-if)# switchport access vlan 10

CONFIGURAR INTERFACES TRONCALES

S1(config)# interface range f0/1,f0/3

S1(config-if)# no shutdown

S1(config-if)# switchport mode trunk

S1(config-if)# switchport trunk native vlan 99

 

CREAR INTERFAZ DE ADMINISTRACIÓN

S1(config)# interface vlan 99

S1(config-if)# ip address 192.168.1.11 255.255.255.0

 

ROOT PRIMARIO

S2(config)# spanning-tree vlan 1,10,99 root primary

ROOT SECUNDARIO

S1(config)# spanning-tree vlan 1,10,99 root secondary

CAMBIAR A RAPID-PVST

S1(config)# spanning-tree mode rapid-pvst

CONFIGURAR PORTFAST

S1(config)# interface f0/6

S1(config-if)# spanning-tree portfast

HABILITAR BPDU GUARD EN LA INTERFAZ

S1(config)# interface f0/6

S1(config-if)# spanning-tree bpduguard enable

HACER LO ANTERIOR PERO POR DEFECTO EN TODAS LAS INTERFACES

S3(config)# spanning-tree portfast default

S3(config)# spanning-tree portfast bpduguard default

 

HSRP

R1(config)# interface g0/1

R1(config-if)# standby 1 ip 192.168.1.254

R1(config-if)# standby 1 priority 150

R1(config-if)# standby 1 preempt

R3(config)# interface g0/1

R3(config-if)# standby 1 ip 192.168.1.254

GLBP

R1(config)# interface g0/1

R1(config-if)# glbp 1 ip 192.168.1.254

R1(config-if)# glbp 1 preempt

R1(config-if)# glbp 1 priority 150

R1(config-if)# glbp 1 load-balancing round-robin

R3(config)# interface g0/1

R3(config-if)# glbp 1 ip 192.168.1.254

R3(config-if)# glbp 1 load-balancing round-robin

 

ETHERCHANNEL

PAGP SE HABILITA EL PORTCHANNEL PRIMERO, LUEGO SE CONFIGURAN ESTOS COMO TRONCAL

S1(config)# interface range f0/3-4

S1(config-if-range)# channel-group 1 mode desirable

S1(config-if-range)# no shutdown

S3(config)# interface range f0/3-4

S3(config-if-range)# channel-group 1 mode auto

S3(config-if-range)# no shutdown

 

CONFIGURAR PUERTO TRONCALES

S1(config)# interface port-channel 1

S1(config-if)# switchport mode trunk

S1(config-if)# switchport trunk native vlan 99

S3(config)# interface port-channel 1

S3(config-if)# switchport mode trunk

S3(config-if)# switchport trunk native vlan 99

 

LACP SE CONFIGURA EL TRONCAL Y EL PORTCHANNEL EN LAS INTERFACES FÍSICAS

S1(config)# interface range f0/1-2

S1(config-if-range)# switchport mode trunk

S1(config-if-range)# switchport trunk native vlan 99

S1(config-if-range)# channel-group 2 mode active

S1(config-if-range)# no shutdown

S2(config)# interface range f0/1-2

S2(config-if-range)# switchport mode trunk

S2(config-if-range)# switchport trunk native vlan 99

S2(config-if-range)# channel-group 2 mode passive

S2(config-if-range)# no shutdown

 

OSPF

DETERMINAR DR Y BDR

R1(config)# interface g0/1

R1(config-if)# ip ospf priority 255

R1(config-if)# end

R3(config)# interface g0/1

R3(config-if)# ip ospf priority 100

R3(config-if)# end

R2(config)# interface g0/0

R2(config-if)# ip ospf priority 0

R2(config-if)# end

 

CONFIGURACIONES Y MODIFICACIONES DE OSPF

R1(config)# router ospf 1

R1(config-router)# router-id 1.1.1.1

R1(config)# router ospf 1

R1(config-router)# network 192.168.1.0 0.0.0.255 area 0

R1(config-router)# network 192.168.12.0 0.0.0.3 area 0

 

CAMBIAR REFERENCIA DE COSTO SI SE USAN INTERFACES GIGA

R3(config)# router ospf 1

R3(config-router)# auto-cost reference-bandwidth 1000

MODIFICAR COSTO EN LAS INTERFACES

R1(config)# int s0/0/1

R1(config-if)# ip ospf cost 16000

REDISTRIBUIR RUTA POR DEFECTO

R2(config)# ip route 0.0.0.0 0.0.0.0 loopback0

R2(config)# router ospf 1

R2(config-router)# default-information originate

AUTENTICACIÓN OSPF

EN UNA INTERFAZ

R1(config)# interface s0/0/0

R1(config-if)# ip ospf message-digest-key 1 md5 MD5KEY

R1(config-if)# ip ospf authentication message-digest

EN EL ÁREA OSPF

R1(config)# router ospf 1

R1(config-router)# area 0 authentication message-digest

R1(config)# interface s0/0/1

R1(config-if)# ip ospf message-digest-key 1 md5 MD5KEY

 

OSPFV2 MULTIAREA

R1(config)# router ospf 1

R1(config-router)# router-id 1.1.1.1

R1(config-router)# network 192.168.1.0 0.0.0.255 area 1

R1(config-router)# network 192.168.2.0 0.0.0.255 area 1

R1(config-router)# network 192.168.12.0 0.0.0.3 area 0

R1(config-router)# passive-interface lo1

R1(config-router)# passive-interface lo2

R1(config-router)# exit

R1(config)# ip route 0.0.0.0 0.0.0.0 lo0

R1(config)# router ospf 1

R1(config-router)# default-information originate

 

SUMARIZAR RUTAS DEL ÁREA 1

R1(config)# router ospf 1

R1(config-router)# area 1 range 192.168.0.0 255.255.252.0

 

OSPFV3 MULTIAREA

R1(config)# ipv6 router ospf 1

R1(config-rtr)# router-id 1.1.1.1

R1(config)# interface lo0

R1(config-if)# ipv6 ospf 1 area 1

R1(config-if)# ipv6 ospf network point-to-point

R1(config-if)# interface lo1

R1(config-if)# ipv6 ospf 1 area 1

R1(config-if)# ipv6 ospf network point-to-point

R2(config)# interface lo8

R2(config-if)# ipv6 ospf 1 area 0

R2(config-if)# ipv6 ospf network point-to-point

R2(config-if)# interface s0/0/0

R2(config-if)# ipv6 ospf 1 area 0

R2(config-if)# interface s0/0/1

R2(config-if)# ipv6 ospf 1 area 0

 

SUMARIZAR RUTAS IPV6 DE UN ÁREA

R1(config)# ipv6 router ospf 1

R1(config-rtr)# area 1 range 2001:DB8:ACAD::/62

R3(config)# ipv6 router ospf 1

R3(config-rtr)# area 2 range 2001:db8:acad:4::/62

 

EIGRP IPV4

R1(config)# router eigrp 10

R1(config-router)# network 10.1.1.0 0.0.0.3

R1(config-router)# network 192.168.1.0 0.0.0.255

R1(config-router)# network 10.3.3.0 0.0.0.3

R1(config-router)# passive-interface g0/0

EIGRP IPV6

R1(config)# ipv6 unicast-routing

R1(config)# ipv6 router eigrp 1

R1(config)# ipv6 router eigrp 1

R1(config-rtr)# eigrp router-id 1.1.1.1

R1(config-rtr)# no shutdown

R1(config)# interface g0/0

R1(config-if)# ipv6 eigrp 1

R1(config-if)# interface s0/0/0

R1(config-if)# ipv6 eigrp 1

R1(config-if)# interface s0/0/1

R1(config-if)# ipv6 eigrp 1

 

SUMARIZAR EN EIGRP

R3(config)# interface s0/0/0

R3(config-if)# ip summary-address eigrp 1 192.168.33.0 255.255.255.240

REDISTRIBUCIÓN

R2(config)# ip route 0.0.0.0 0.0.0.0 Lo1

R2(config)# router eigrp 1

R2(config-router)# redistribute static

MODIFICAR ANCHO DE BANDA UTILIZADO POR EIGRP

R1(config)# interface s0/0/0

R1(config-if)# ip bandwidth-percent eigrp 1 75

 

MODIFICAR LOS TIMERS DE EIGRP

R1(config)# interface s0/0/0

R1(config-if)# ip hello-interval eigrp 1 60

R1(config-if)# ip hold-time eigrp 1 180

AUTENTICACIÓN EIGRP

R1(config)# key chain EIGRP-KEYS

R1(config-keychain)# key 1

R1(config-keychain-key)# key-string cisco

R1(config)# interface s0/0/0

R1(config-if)# ip authentication key-chain eigrp 1 EIGRP-KEYS

R1(config-if)# ip authentication mode eigrp 1 md5

 

CCNA 4 v5.0

PPP

ENCAPSULAMIENTO

Branch1(config)# interface s0/0/0

Branch1(config-if)# encapsulation ppp

AUTENTICACIÓN CHAP

Central(config)# interface s0/0/0

Central(config-if)# encapsulation ppp

Central(config)# username Branch3 password cisco

Branch3(config)# username Central password cisco

Branch3(config)# interface s0/0/1

Branch3(config-if)# ppp authentication chap

 

FRAME RELAY

SWITCH FRAME RELAY

FR(config)# frame-relay switching

FR(config)# interface s0/0/0

FR(config-if)# encapsulation frame-relay

FR(config)# interface s0/0/0

FR(config-if)# frame-relay intf-type dce

FR(config-if)# frame-relay route 103 interface s0/0/1 301

FR(config-if)# no shutdown

FR(config)# interface s0/0/1

FR(config-if)# encapsulation frame-relay

FR(config-if)# frame-relay intf-type dce

FR(config-if)# frame-relay route 301 interface s0/0/0 103

FR(config-if)# no shutdown


CONFIGURACIÓN BÁSICA FRAME RELAY

R1(config)# interface s0/0/0

R1(config-if)# encapsulation frame-relay

R1(config)# interface s0/0/0

R1(config-if)# no frame-relay inverse-arp

R1(config)# interface s0/0/0

R1(config-if)# frame-relay map ip 10.1.1.2 103 broadcast

R1(config-if)# frame-relay map ipv6 2001:db8:acad:b::3 103

R1(config-if)# frame-relay map ipv6 fe80::3 103 broadcast

R1(config)# interface s0/0/0

R1(config-if)# frame-relay map ip 10.1.1.1 103

R1(config-if)# frame-relay map ipv6 2001:db8:acad:b::1 103

 

CAMBIAR TIPO DE ENCAPSULAMIENTO

R3(config)# interface s0/0/1

R3(config-if)# encapsulation frame-relay ietf

CAMBIAR TIPO DE LMI

R3(config-if)# frame-relay lmi-type ansi

R3(config)# interface s0/0/1

R3(config-if)# frame-relay lmi-type cisco

CONFIGURAR SUBINTERFACES FRAME RELAY

FR(config)# interface s0/0/0

FR(config-if)# frame-relay route 113 interface s0/0/1 311

FR(config-if)# interface s0/0/1

FR(config-if)# frame-relay route 311 interface s0/0/0 113

R1(config)# interface s0/0/0.113 point-to-point

R1(config-subif)# ip address 10.1.1.5 255.255.255.252

R1(config-subif)# ipv6 address 2001:db8:acad:d::1/64

R1(config-subif)# ipv6 address fe80::1 link-local

R1(config-subif)# frame-relay interface-dlci 113

R1(config-fr-dlci)#

R3(config)# interface s0/0/1.311 point-to-point

R3(config-subif)# ip address 10.1.1.6 255.255.255.252

R3(config-subif)# ipv6 address 2001:db8:acad:d::3/64

R3(config-subif)# ipv6 address fe80::3 link-local

R3(config-subif)# frame-relay interface-dlci 311

R3(config-fr-dlci)#

 

NAT

NAT ESTÁTICO

Gateway(config)# ip nat inside source static 192.168.1.20 209.165.200.225

Gateway(config)# interface g0/1

Gateway(config-if)# ip nat inside

Gateway(config-if)# interface s0/0/1

Gateway(config-if)# ip nat outside

NAT DINÁMICO

Gateway(config)# access-list 1 permit 192.168.1.0 0.0.0.255

Gateway(config)# ip nat pool public_access 209.165.200.242 209.165.200.254 netmask 255.255.255.224

Gateway(config)# ip nat inside source list 1 pool public_access

PAT

Gateway(config)# ip nat inside source list 1 interface serial 0/0/1 overload

 

PPPoE

ISP

ISP(config)# username Cust1 password ciscopppoe

ISP(config)# ip local pool PPPoEPOOL 10.0.0.1 10.0.0.10

ISP(config)# interface virtual-template 1

ISP(config-if)# ip address 10.0.0.254 255.255.255.0

ISP(config-if)# mtu 1492

ISP(config-if)# peer default ip address pool PPPoEPOOL

ISP(config-if)# ppp authentication chap callin

ISP(config-if)# exit

ISP(config)# bba-group pppoe global

ISP(config-bba-group)# virtual-template 1

ISP(config-bba-group)# exit

ISP(config)# interface g0/1

ISP(config-if# pppoe enable group global

ISP(config-if)# no shutdown

CLIENTE

Cust1(config)# interface g0/1

Cust1(config-if)# pppoe enable

Cust1(config-if)# pppoe-client dial-pool-number 1

Cust1(config-if)# exit

Cust1(config)# interface dialer 1

Cust1(config-if)# mtu 1492

Cust1(config-if)# ip address negotiated

Cust1(config-if)# encapsulation ppp

Cust1(config-if)# dialer pool 1

Cust1(config-if)# ppp authentication chap callin

Cust1(config-if)# ppp chap hostname Cust1

Cust1(config-if)# ppp chap password ciscopppoe

Cust1(config-if)# exit

Cust1(config)# ip route 0.0.0.0 0.0.0.0 dialer 1

 

GRE TÚNEL

WEST(config)# interface tunnel 0

WEST(config-if)# ip address 172.16.12.1 255.255.255.252

WEST(config-if)# tunnel source s0/0/0

WEST(config-if)# tunnel destination 10.2.2.1

EAST(config)# interface tunnel 0

EAST(config-if)# ip address 172.16.12.2 255.255.255.252

EAST(config-if)# tunnel source 10.2.2.1

EAST(config-if)# tunnel destination 10.1.1.1

 

NTP

RELOJ LOCAL

R1# clock set 9:39:00 05 july 2013

NTP MASTER

R1(config)# ntp master 5

NTP CLIENTE

R2(config)# ntp server 10.1.1.1

R2(config)# ntp update-calendar


SYSLOG

R2(config)# service timestamps log datetime msec

R2(config)# logging host 172.16.2.3

R2(config)# logging trap warnings

o

R2(config)# logging trap 4


SNMP

AGENTE SNMP

R1(config)# snmp-server community ciscolab ro SNMP_ACL

R1(config)# snmp-server location snmp_manager

R1(config)# snmp-server contact ciscolab_admin

R1(config)# snmp-server host 192.168.1.3 version 2c ciscolab

R1(config)# snmp-server enable traps

R1(config)# ip access-list standard SNMP_ACL

R1(config-std-nacl)# permit 192.168.1.3

 

NETFLOW

R2(config)# interface s0/0/0

R2(config-if)# ip flow ingress

R2(config-if)# ip flow egress

R2(config-if)# interface s0/0/1

R2(config-if)# ip flow ingress

R2(config-if)# ip flow egress

R2(config)# ip flow-export destination 192.168.2.3 9996

R2(config)# ip flow-export version 9


Tweet Pin It

About The Author

CisacadESP

Leave a Reply Cancel Reply

Este sitio usa Akismet para reducir el spam. Aprende cómo se procesan los datos de tus comentarios.

CCNA v7.0 en Español Preguntas y Respuestas

  • CCNA 1
  • CCNA 2
  • CCNA 3
  • Módulos 1 - 3: Examen de conectividad de red básica y comunicaciones
  • Módulos 4 - 7: Examen de conceptos Ethernet
  • Módulos 8 - 10: Examen de comunicación entre redes
  • Módulos 11 - 13: Examen de direccionamiento IP
  • Módulos 14 - 15: Examen de comunicaciones de aplicaciones de red
  • Módulos 16 - 17: Examen de crear y asegurar una red pequeña
  • Evaluación de habilidades prácticas de PT (PTSA)
  • CCNA 1 v7 Examen Final de Práctica Respuestas
  • CCNA 1 v7 Examen Final de habilidades ITN (PTSA) Respuestas
  • CCNA 1 Examen Final Preguntas y Respuestas
  • Módulos 1 - 4: Examen de conceptos de Switching, VLANs y enrutamiento entre redes VLAN
  • Módulos 5 - 6: Examen de Redes Redundantes
  • Módulos 7 - 9: Examen de redes Disponibles y Confiables
  • Módulos 10 - 13: Examen de seguridad L2 y WLAN
  • Módulos 14 - 16: Examen de conceptos de enrutamiento y configuración
  • Evaluación de habilidades prácticas de PT (PTSA) SRWE - Parte 1
  • Evaluación de habilidades prácticas de PT (PTSA) SRWE - Parte 2
  • CCNA 2 Examen Practico Final - SRWE Preguntas y Respuestas
  • Examen Final de Habilidades SRWE (PTSA) Respuestas
  • CCNA 2 Examen Final de SRWE Preguntas y Respuestas
  • Módulos 1 - 2: Examen de conceptos OSPF y configuración
  • Módulos 3 - 5: Examen de seguridad de la red
  • Módulos 6 - 8: Examen de conceptos de WAN
  • Módulos 9 - 12: Examen de optimización, supervisión y solución de problemas de redes
  • Módulos 13 - 14: Examen de Tecnologías de Redes Emergentes
  • Evaluación de habilidades prácticas de PT (PTSA) ENSA Respuestas
  • CCNA 3 Examen Practico Final - ENSA Preguntas y Respuestas
  • Examen Final de Habilidades ENSA (PTSA) Respuestas
  • CCNA 3 Examen Final de ENSA Preguntas y Respuestas Opcion A
  • CCNA 3 Examen Final de ENSA Preguntas y Respuestas Opcion B
  • Examen de práctica de certificación CCNA (200-301) Respuestas

CCNA v7.0 in English

  • CCNA 1 v7.0
  • CCNA 2 v7.0
  • CCNA 3 v7.0
Examen Modulos 1 – 3 Respuestas Examen Modulos 4 – 7 Respuestas Examen Modulos 8 – 10 Respuestas Examen Modulos 11 – 13 Respuestas Examen Modulos 14 – 15 Respuestas Examen Modulos 16 – 17 Respuestas CCNA 1 v7 Practice Skill Assessment CCNA 1 v7 Practice Final Exam CCNA 1 v7 Practice Final Exam
Examen Modulos 1 – 4 Respuestas Examen Modulos 5 – 6 Respuestas Examen Modulos 7 – 9 Respuestas Examen Modulos 10 – 13 Respuestas Examen Modulos 14 – 16 Respuestas CCNA 2 v7 Practice Skill Assessment
Examen Modulos 1 – 2 Respuestas Examen Modulos 3 – 5 Respuestas Examen Modulos 6 – 8 Respuestas Examen Modulos 9 – 12 Respuestas Examen Modulos 13 – 14 Respuestas CCNA 3 v7 Practice Skill Assessment

Cisacad.net

Examenes Cisco CCNA v7.0 y IT Essentials v8 en Español
Copyright © 2023 Cisacad.net
Política de Privacidad CCNA v7.0 y v6.0 Examenes Cisco 2021 - Cisacad.net
Utilizamos cookies en nuestro sitio web para ofrecerle la experiencia más relevante al recordar sus preferencias y visitas repetidas. Al hacer clic en "Aceptar", usted consiente el uso de TODAS las cookies.
No vender mi información personal..
Cookies configuraciónACEPTO
Manage consent

Resumen de la privacidad

Este sitio web utiliza cookies para mejorar su experiencia mientras navega por el sitio web. De ellas, las cookies clasificadas como necesarias se almacenan en su navegador, ya que son esenciales para el funcionamiento de las funciones básicas del sitio web. También utilizamos cookies de terceros que nos ayudan a analizar y comprender cómo utiliza usted este sitio web. Estas cookies se almacenan en su navegador sólo con su consentimiento. También tiene la opción de excluirse de estas cookies. Pero la exclusión de algunas de estas cookies puede afectar a su experiencia de navegación.
Necesarias
Siempre activado
Las cookies necesarias son absolutamente imprescindibles para que el sitio web funcione correctamente. Estas cookies garantizan las funcionalidades básicas y las características de seguridad del sitio web, de forma anónima.
CookieDuraciónDescripción
cookielawinfo-checbox-analytics11 monthsEsta cookie es establecida por el plugin GDPR Cookie Consent. La cookie se utiliza para almacenar el consentimiento del usuario para las cookies de la categoría "Analytics".
cookielawinfo-checbox-functional11 monthsLa cookie se establece por el consentimiento de cookies GDPR para registrar el consentimiento del usuario para las cookies en la categoría "Funcional".
cookielawinfo-checbox-others11 monthsEsta cookie es establecida por el plugin GDPR Cookie Consent. La cookie se utiliza para almacenar el consentimiento del usuario para las cookies de la categoría "Otros".
cookielawinfo-checkbox-necessary11 monthsEsta cookie es establecida por el plugin GDPR Cookie Consent. Las cookies se utilizan para almacenar el consentimiento del usuario para las cookies en la categoría "Necesario".
cookielawinfo-checkbox-performance11 monthsEsta cookie es establecida por el plugin GDPR Cookie Consent. La cookie se utiliza para almacenar el consentimiento del usuario para las cookies de la categoría "Rendimiento".
viewed_cookie_policy11 monthsLa cookie es establecida por el plugin GDPR Cookie Consent y se utiliza para almacenar si el usuario ha consentido o no el uso de cookies. No almacena ningún dato personal.
Funcional
Las cookies funcionales ayudan a realizar ciertas funcionalidades como compartir el contenido del sitio web en las plataformas de las redes sociales, recoger opiniones y otras características de terceros.
Rendimiento
Las cookies de rendimiento se utilizan para entender y analizar los índices de rendimiento clave del sitio web, lo que ayuda a ofrecer una mejor experiencia de usuario a los visitantes.
Analytics
Las cookies analíticas se utilizan para entender cómo interactúan los visitantes con el sitio web. Estas cookies ayudan a proporcionar información sobre las métricas del número de visitantes, la tasa de rebote, la fuente de tráfico, etc.
Publicidad
Las cookies de publicidad se utilizan para ofrecer a los visitantes anuncios y campañas de marketing relevantes. Estas cookies rastrean a los visitantes en todos los sitios web y recopilan información para ofrecer anuncios personalizados.
Otras
Otras cookies no categorizadas son aquellas que están siendo analizadas y que aún no han sido clasificadas en una categoría.
GUARDAR Y ACEPTAR