IT Essentials v4.1 Chapter 6 Exam
Which network device makes forwarding decisions based on the destination MAC address that is contained in the frame?
A customer is considering a multipurpose device to create a home network. Which three devices are usually integrated into a multipurpose network device? (Choose three.)
wireless access point
Which technology would be recommended for a business that requires workers to access the Internet while visiting customers at many different locations?
When is a dial-up connection used to connect to an Internet provider?
when a high-speed connection is provided over a cable TV network
when a digital connection is provided using ISDN
when a regular telephone line is used
when a cellular telephone provides the service
Which type of connection to the Internet is capable of the fastest transfer rates?
Which statement describes the logical topology for a LAN?
It describes how computers access the LAN medium.
It depicts the locations of main routers and switches in a LAN.
It lists the number of computers, routers, and switches on the LAN.
It defines how computers connect to a LAN.
ABC Company requires preventive maintenance for all local network cabling once a year. Which task should be included in the preventive maintenance program?
Replace all labeling on the cables.
Replace all cable supports to prevent loose attachment points.
Disconnect and reconnect all patch cables.
Inspect all patch cables for breaks.
What is an example of network maintenance?
immediately turning off a network device if the network device is making an unusual sound
educating users on IT policies and procedures
using cable supports to identify the devices to which the cables are connected
not doing preventive maintenance regularly if the maintenance interrupts network activity
A technician is troubleshooting a problem where the user claims access to the Internet is not working, but there was access to the Internet the day before. Upon investigation, the technician determines that the user cannot access the network printer in the office either. The network printer is on the same network as the computer. The computer has 169.254.100.88 assigned as an IP address. What is the most likely problem?
The router that connects this network to other networks is down.
The network interface card driver needs to be updated.
The IP default gateway on the computer is incorrect.
The computer cannot communicate with a DHCP server.
Which technology is most often used to connect devices to a PAN?
IEEE 802.11n wireless
fiber optic cabling
Which three layers of the OSI model map to the application layer of the TCP/IP model? (Choose three.)
A device has an IPv6 address listed as 2001:0DB8:75a3:0214:0607:1234:aa10:ba01. What is the interface ID of the device?
What is a characteristic of the UDP protocol?
end-to-end establishment before delivery
What would be a disadvantage of configuring a wireless router or access point to operate only in accordance with the 802.11g protocol standard?
802.11a wireless devices will not be able to connect to the wireless network.
The 802.11g standard does not support static IP addressing.
The 802.11g standard does not support advanced network security features.
Using only 802.11g will cause multiple SSIDs to be broadcast.
What is the maximum segment length that is specified by the 1000BASE-T standard?
1640 ft (500 m)
984 ft (300 m)
328 ft (100 m)
3280 ft (1000 m)
607 ft (185 m)
Which two characteristics describe Ethernet technology? (Choose two.)
It is supported by IEEE 802.3 standards.
It is supported by IEEE 802.5 standards.
It typically uses an average of 16 Mb/s for data transfer rates.
It uses a ring topology.
It uses the CSMA/CD access control method.
Which three factors are reasons for a company to choose a client/server model for a network instead of peer-to-peer? (Choose three.)
The company network requires secure access to confidential information.
Each user understands how to safely share files across a network.
All employees passed a strict background check as part of the corporate hiring practices.
The data gathered by the employees is critical and should be backed up on a regular basis.
The network is small with fewer than eight users.
The users need a central database to store inventory and sales information.
What benefit is provided by a computer data network?
When would a printer be considered a network host?
when it is connected to a workstation
when it is connected to a laptop
when it is connected to a switch
when it is connected to a PC
A user can print to a printer that is on the same network, but the traffic of the user cannot reach the Internet. What is a possible cause of the problem?
The PC default gateway address is missing or incorrect.
The NIC on the PC is faulty.
The PC has an incorrect IP address.
The network cable connected to the user PC is faulty.
What is identified by the 100 in the 100BASE-TX standard?
the maximum cable distance in meters
the series number of the standard
the maximum number of network nodes
the maximum bandwidth in Mb/s
A user installs a new gigabit NIC in a PC. The user notices that the data transfer rate is much slower than expected. What should the user do to fix the problem?
Change the NIC duplex setting from half duplex to full duplex.
Disable sleep mode.
Disable hibernation mode.
Change the value assigned to the NIC wake-on-LAN setting.
A company adds a few refurbished computers to a network. The company finds, however, that the refurbished computers perform significantly worse than the original networked computers do. The original computers performed much faster with applications that required the transfer of data over the network. What should the company technicians do?
Check if the refurbished computers are using a VPN.
Check if the network interface cards in the refurbished computers are limited to 10 Mb/s.
Check if subnet mask is correct.
Check if the gateway address is correct.
What is the major difference between desktop and laptop motherboards?
Desktops use the AT form factor while laptops use the mini or baby AT form factor.
Desktop motherboards typically have a standard form factor and are interchangeable while laptop motherboards are proprietary.
Desktops have a variety of expansion and RAM slot designs while laptops have standard expansion and RAM slot designs.
Currently there is no significant difference in the motherboard form factors for the desktop and laptop.
Which type of interface do current laptops use to achieve similar expansion capabilities as desktops?
Which display technology is most commonly found in modern laptop computers?
Which generation of cell-phone standards was the first to deal with how to send and receive text, photographs, and video?
Which two characteristics make laptops a better choice than desktop computers? (Choose two.)
Refer to the exhibit. Which type of connection is indicated when a laptop LED is illuminated with the symbol that is shown?
A technician is responding to a helpdesk ticket for a laptop that has a distorted image of the Windows desktop. What is one possible solution?
Adjust the power scheme.
Calibrate the LCD backlight.
Reset the laptop to the native resolution.
Obtain an updated display driver from the laptop manufacturer.
Which two devices can be individually configured within Windows XP to power off after the laptop has been idle for a given period of time? (Choose two.)
Which three components commonly connect to USB or FireWire ports? (Choose three.)
Which two laptop ports are used primarily for communication and network connectivity? (Choose two.)
Where can a technician change the power schemes on a laptop running Windows XP?
Select Advanced Settings from within the BIOS.
Select Power Options from within the Control Panel.
Select Power from within Administrative Tools.
Select Configure Power Settings from within Computer Management.
Which two questions that a technician can ask during the troubleshooting process are considered open-ended? (Choose two.)
Does the monitor come on?
Can you access the Internet?
Is the laptop battery charging?
What software has been installed?
How would you describe the problem you are experiencing?
A technician is replacing a laptop SODIMM. With what component is the technician working?
ExpressBus expansion card
Which two actions should be performed to clean the surface of CDs and DVDs? (Choose two.)
Use a lint-free cotton cloth.
Use a cotton ball.
Use a household cleaning solution.
Wipe the disc from the center outward.
Wipe the disc in a clockwise direction.
Wipe the disc in a counterclockwise direction.
A technician has been called in to troubleshoot a laptop that fails to power on. The technician repeatedly pushes the power button without any results. What should the technician do next?
Attach the AC adapter.
Replace the battery with a spare.
Press a key on the keyboard or use the pointing device.
Remove any unused devices including externally connected ones.
Refer to the exhibit. Which two form factors are supported by the devices shown in the graphic? (Choose two.)
Refer to the exhibit. A laptop has these graphics on specific keys on the keyboard. Which key would be used in conjunction with the Fn key to connect a laptop to an external monitor?
Refer to the exhibit. Which laptop component port is circled?
What is the proper way to clean optical drives?
Spray ionized solution inside the drive.
Use an electrostatic vacuum cleaner.
Blow the dust with compressed air from the inside.
Use a cleaning disc for optical drives.
Which component should be removed before cleaning a laptop?